Troubleshooting - Landmann 32961 Instructions D'assemblage, D'entretien Et D'utilisation

Problem
Power indicator light
does not illuminate.
Longer than normal
heating time.
no smoke.
Control panel
displaying error
message.
Power indicator light
is on but the smoker
is not heating.
Control panel does
not adjust heat
or time.
Meat Probe does not
show temperature
on display.
Temperature
decreases sharply
or shuts down
prematurely.
Gap between the
door and the cabinet.
Excessive smoke is
escaping through
door
Grease leaking
from cabinet

Troubleshooting

Cause
1. Electrical cord not plugged into
outlet.
2. Main house fuse has been tripped.
3. Wire connection on control panel
is not properly connected to
the cabinet.
4. Control panel has malfunctioned.
1. Door not closed completely.
2. Temperature controller has
malfunctioned.
3. Use of extension cord.
1. No wood in wood chip box.
2. Heating element not functioning.
1. Control panel has malfunctioned.
1. Control panel has malfunctioned.
1. Control panel has malfunctioned.
1. Meat probe not properly installed
in back panel of cooking cabinet.
2. Meat probe is damage.
3. Control panel has malfunctioned.
1. Temperature controller has
malfunctioned.
1. Door is out of aligment.
2. Door seal is damaged.
1. Door is out of aligment
2. Door seal is damaged
1. Grease pan is not properly
positioned
2. Grease pan is filled up with grease
and is overflowing
11
Solution
1. Check outlet connection.
2. Check house fuses. DO NOT operate
other appliances on same
electrical circuit.
3. Remove control panel and to check
all wire connections.
4. DO NOT use the smoker and contact
the manufacturer.
1. Close door securely.
2. DO NOT use the smoker and
contact the manufacturer.
3. Discontinue use of extension cord.
1. Add wood to wood chip box..
2. DO NOT use the smoker and
contact the manufacturer.
1. DO NOT use the smoker and
contact the manufacturer.
1. DO NOT use the smoker and
contact the manufacturer.
1. DO NOT use the smoker and
contact the manufacturer.
1. Reinstall and test.
2. DO NOT use the probe contact
manufacturer for replacement probe.
3. DO NOT use the smoker and contact
the manufacturer.
1. DO NOT use the smoker and
contact the manufacturer.
1. Check outlet connection
2. Do not use the smoker and contact
the manufacturer
1. Check door hinge bolts to make sure
they are tight
2. Do not use the smoker and contact
the manufacturer
1. Reposition grease pan
2. Empty grease pan