Publicité
Les langues disponibles
Les langues disponibles
01-E1-E9-QT-90W(EX)
Downloaded from:
http://www.usersmanualguide.com/
Listening to a Cassette Tape
1
Set the FUNCTION switch to TAPE.
2
Open the cassette compartment by push-
7 7 7 7 7 button.
ing the STOP/EJECT
3
Load a cassette into the cassette com-
partment with the side to be played fac-
ing up.
4
Press the PLAY 0 0 0 0 0 button.
5
To advance the tape, press the STOP/
7 7 7 7 7 button, then press the F
EJECT
FWD 2 button. To rewind, press the
STOP/EJECT
7 7 7 7 7 button, then press the
REWIND 3
3 button.
3
3
3
To interrupt playback:
Press the PAUSE 6 6 6 6 6 button during playback.
Press the PAUSE 6 6 6 6 6 button again to resume
playback.
To stop playback:
Press the STOP/EJECT
7 button.
Precautions:
Be sure not to press the PLAY 0 0 0 0 0 and RE-
WIND 3
3 buttons simultaneously, or the
3
3
3
tape will become damaged.
Before changing from one tape operation
to another, press the STOP/EJECT
button.
Do not press the PAUSE 6 button whilst the
fast forward or rewind operations are in
progress. The F FWD 2 or REWIND 3
button will not be released when the tape
end is reached. Once this occurs, press the
STOP/EJECT
7 button.
6
Cassette tape
For playback, use normal or low-noise tapes
for the best sound. (Metal or CrO
not recommended.) For recording, use only
normal tapes.
Do not use C-120 tapes, or poor-quality
tapes, as they may cause malfunctions.
Before loading a tape into the cassette com-
partment, tighten the slack with a pen or
pencil.
Cassettes have removable tabs that prevent
accidental recording or erasing. Removing
the tab will protect the corresponding side
from being erased. Cover the tab holes with
adhesive tape to erase or record again.
Tab for side B (2)
Tab for side A (1)
7 7 7 7 7
E-5
01.9.6, 3:43 PM
tapes are
2
Side A (1)
Publicité
