Sharp QT-90W Mode D'emploi page 2

01-E1-E9-QT-90W(EX)
Downloaded from: http://www.usersmanualguide.com/
Special Notes
The letters in brackets contained in the
model number indicate the colour of the
product only. Operation and specifications
are unaffected.
Audio-visual material may consist of copy-
righted works which must not be recorded
without the authority of the owner of the
copyright.
Please refer to the relevant laws in your
country.
When the FUNCTION switch is set at
STAND-BY position, mains voltage is still
present inside the unit.
Accessory
AC power lead x 1
Precautions
Do not expose the unit to moisture, to tem-
peratures higher than 60°C (140°F) or to
extremely low temperatures.
Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust, hu-
midity and electronic/electrical equipment
(home computers, facsimiles, etc.) which
generates electrical noise.
Hold the AC power plug by the head when
removing it from the AC socket as pulling
the lead can damage internal wires.
When cleaning the heads, pinch roller, etc.,
remove the AC power lead from the AC
socket as the unit contains high voltages.
Do not remove the outer cover, as this may
result in electric shock. Refer internal ser-
vice to your local SHARP service facility.
Use the unit on a firm, level surface free
from vibration, and do not place anything
on the top of the unit.
If the unit does not work properly, set the
FUNCTION switch to STAND-BY and then
to ON again.
2
ENGLISH
Warning:
This unit contains no user serviceable parts.
Never remove covers unless qualified to do so.
This unit contains dangerous voltages, always
remove mains plug from the socket before any
service operation and when not in use for a
long period.
Warning:
To prevent fire or shock hazard, do not expose
this appliance to dripping or splashing. No ob-
jects filled with liquids, such as vases, shall be
placed on the apparatus.
Notes:
The AC power lead is located in the pack-
ing material.
Only the accessory in the drawing is in-
cluded.
In case of an electrical storm, unplug the
unit for safety.
This unit should only be used within the
range of 5°C - 35°C (41°F - 95°F).
The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, tablecloths, curtains,
etc.
No naked flame sources, such as lighted
candles, should be placed on the appara-
tus.
Attention should be drawn to the environ-
mental aspects of battery disposal.
Warning:
The voltage used must be the same as that
specified on this unit. Using this product with a
higher voltage other than which is specified is
dangerous and may result in a fire or other type
of accident causing damage. SHARP will not
be held responsible for any damage resulting
from use of this unit with a voltage other than
that which is specified.
E-1
01.9.6, 3:43 PM