Table des Matières

Publicité

Error Messages

Symptoms
Reason
Water supply is not adequate
in area.
Water supply taps are not
completely open.
Water supply hose(s) are
kinked.
The filter of the supply
hose(s) are clogged.
If water leakage occurred in
the aqua stop supply hose,
indicator
will become red.
May vary depending on the
model.
Load is too small.
Load is out of balance.
The appliance has an
imbalance detection and
correction system. If
individual heavy articles
are loaded (e.g. bath mat,
bath robe, etc.) this system
may stop spinning or even
interrupt the spin cycle
altogether.
If the laundry is still too wet
at the end of the cycle, add
smaller articles of laundry to
balance the load and repeat
the spin cycle.
Solution
• Check another tap in the
house.
• Fully open tap.
• Straighten hose(s).
• Check the filter of the supply
hose.
• Use the aqua stop supply
hose.
• Add 1 or 2 similar items to
help balance the load.
• Add 1 or 2 similar items to
help balance the load.
• Rearrange load to allow
proper spinning.
• Rearrange load to allow
proper spinning.
EN
45

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

F14wd85eh serieF4j7th0wF4j7thw0wF14wd85eh1

Table des Matières