Cooking Functions; Grill; Plancha - Ninja Foodi MAXPRO AG651EU Notice D'utilisation

Masquer les pouces Voir aussi pour Foodi MAXPRO AG651EU:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 42

COOKING FUNCTIONS

Grill

Cook with lid open for bottom heat only,
best for cooking delicate foods and lean
proteins such as kebabs or vegetables.
Cook with lid closed for top and bottom heat
which is best for thick cuts or frozen proteins.
1
To install the grill plate, position it in the
front of the base so it hooks in, then
press down on the back of the plate
until it clicks in place. Ensure the splatter
guard is in place, then close the lid.
2 Make sure the unit is plugged in and
press
to turn the unit on. Grill will be
selected by default.
3 The default temperature setting will
display. To adjust temperature if desired,
press TEMP button and turn dial.
4 Press the TIME button and turn the dial
to select the desired time.
5 Press dial to begin preheating. The
progress bar will illuminate. It will take
approximately 4-7 minutes to preheat.
6 When preheating is complete, the unit
will beep and ADD FOOD will appear
on the display.
7 Open the lid and place ingredients
on the grill plate. Close the lid when
cooking thick cuts of meats, frozen
protein. Keep lid open when cooking
delicate food or lean proteins.
8 When cook time is complete, the unit will
beep and END will appear on the display.
9 Remove food from the grill plate.
10 Remove the grill plate by pressing the
orange release button on the left side of
the unit. The plate will pop up from the
back, then you can lift it up and out.
52
52
ninjakitchen.eu

Plancha

Cook with lid open with heat from the bottom
for foods that require flipping or stirring and
constant attention like sliced vegetables or
fried eggs.
Cook with lid closed for top and bottom heat,
ideal for melting cheese, crisping toppings or
quickly cooking thicker foods.
1
To install the grill plate, position it in the
front of the base so it hooks in, then
press down on the back of the plate
until it clicks in place. Ensure the splatter
guard is in place.
2 Place plancha on the grill so plate sits
level. Line up the lip on the plancha with
the lip on the grill plate (if incorrectly
installed it will tilt forward). Close the lid.
3 Make sure the unit is plugged in and
press
to turn the unit on.
4 Turn the dial to PLANCHA function. The
default temperature setting will display.
To adjust temperature if desired, press
TEMP button and turn dial.
5 Press the TIME button and turn the dial
to select the desired time.
6 Press the dial to begin preheating. The
progress bar will illuminate. It will take
approximately 7-9 minutes to preheat.
COOKING FUNCTIONS – CONT .
7 When preheating is complete, the unit
will beep and ADD FOOD will appear
on the display.
8 Open the lid and place ingredients on
the plancha. The countdown timer has a
15-second delayed start. Leave lid open
unless recipe directs otherwise.
NOTE: If batch cooking meats, for
best results, we recommend in
between batches to close the lid
and run the programmed function for
2-3 minutes before adding more food.
9 When cook time reaches zero, the
unit will beep and END will appear
on the display.
10 Remove food from the plancha, then
remove the plancha from the grill plate.
11 Remove the grill plate by pressing the
orange release button on the left side of
the unit. The plate will pop from the back
then lift up.
53
53
ninjakitchen.eu

Publicité

Table des Matières
loading

Table des Matières