Adjustment - Support Pad - Permobil BodiLink Corpus Manuel D'utilisation

ADJUSTMENT - SUPPORT PAD

Adjusting the support pad with hardware.
1
To adjust the position of the support pad depth relative to the mounting hardware,
unzip the cover to reveal the support pad mounting bolts. Loosen the bolts (A) using
the 5mm hex key.
2
Move the support pad to the desired position. Retighten the bolts using the hex key.
Zip the cover closed.
Support pad depth:
BodiLink on Permobil Corpus Operation Manual
3.5" x 8" (8.9cm x 20.3cm) Support Pad and
Power Mount Hardware shown
12
LPTS
A