Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INSTALLATION - TRACK MOUNT

Attaching the hardware to the track.
In some cases, the LTS hardware will already be attached to the track mount bracket (E). If height, width or depth adjustments are
needed, loosen but do not remove the bolts (A) using the 5mm hex key, and slide the link (D) into position. Tighten the bolts (A) to
secure. This can also be done after the track mount bracket is installed on the Corpus shell.
1
Line up the bolts (A) with the safety
washers (B), the slot-lock double washer
(C), the slots on link (D), the slot on track
mount bracket (E) and the slot-lock double
nut (F).
Note: The bolts (G) on the LTS hardware
should face up, and the curved edge of the
track mount bracket (E) should be oriented
towards the support pad.
2
Tighten the bolts (A) using the 5mm hex
key. Follow these steps for each set of
hardware needed. Continue to step 3.
Attaching the track to the back shell.
3
Remove the back support cushion (H)
from the back shell (J), pulling forward to
separate the hook and loop attachment.
4
Locate the existing 3 bolts along the
rear-facing, outside edge of back shell (J),
next to the armrest. Remove the 3 bolts
to release the existing height adjustment
track and the plastic lateral wedges (not
shown) attached to the front face of the
back shell (J). Discard the removed parts
or retain for future use.
5
Line up the provided button head bolts (K)
with the back shell (J) and the track mount
bracket (E). Tighten the bolts (K), using the
3mm hex key.
Recommendation: For better access to the
bottom bolt, lift the armrest.
6
Adhere the replacement foam support
pads (L) to the back support cushion (H).
The support pads (L) adhere with a hook
and loop attachment and can be placed
wherever the lateral support is needed.
7
Replace the back support cushion (H)
on the back shell (J). Continue to the
"Adjustment and Use" section for final
hardware adjustments and support pad
positioning.
BodiLink on Permobil Corpus Operation Manual
E
D
F
J
K
9
A
C
B
G
E
LTS
H
L

Publicité

Table des Matières
loading

Table des Matières