Haverland TAC-0719 Mode D'emploi page 62

OPERATING FROM THE CONTROL PANEL
The control panel enables you to manage all the main functions
of the appliance, but to fully exploit its potential, you must use the
remote control unit.
TURNING THE APPLIANCE ON
•
Plug into the mains socket.
Two lines appear on the display indicating that the appliance
is on standby.
<b
•
Press the button until the appliance turns on. The last
function active when it was turned off will appear.
✓
Never turn the air conditioner off by unplugging from the mains. Always press the
button(!), then wait for a few minutes before unplugging. This allows the appliance
to perform a cycle of checks to verify operation.
=
COOL
MODE
ldeal for hot muggy weather when you need to air conditioning
and dehumidify the room.
To set this mode correctly:
�8 "
•
Press the "
symbol appears.
•
Select the target temperature by pressing the" & " or
"9" button until the corresponding value is displayed.
•
Select the required fan speed by pressing the" � " button.
Four speeds are available:
;.. Low speed: for silent operation
te
Medium speed: reduces noise levels but still
maintains a good level of comfort
•
Maximum speed: to achieve the target tempe-
rature as rapidly as possible
e
;.. te
The most suitable temperature for the room during the summer
°
varies from 24 C to 27
a temperature much below the outdoor temperature.
button a number of times until the " $ "
Auto speed: the three indicators light up
means the fan speed is auto.
°
C. You are recommended, however, not to set
62
- -
*
-11-
·c
1: 1:1
ô .