COOL WORKS MPPH-08CRN1-BI0 Manuel D'utilisation page 20

REMOTE CONTROL INSTRUC
Indicators on remote controller
AUTO
CLOCK SET TEMP.
ON
OFF
FAN SPEED
Transmission Indicator
This transmission indicator lights when
remote controller transmits signals to the
indoor unit.
Mode display
Displays the current operation mode. Including
AUTO( ), COOL(
AUTO
ONLY ( )and back to AUTO(
ON/OFF display
Displayed by pressing the ON/OFF button.
Press the ON/OFF button again to remove.
Temp. display
Displays the temperature setting (17 C/62 F
to 30 C/86 F）when you set the operating
mode to FAN ONLY, no temperature setting is
displayed.
Time display
C Indicate Timer on/off time(0
or clock time.
The clock time is indicated only when no
F
AUTO-ON/OFF timer is set. When AUTO-
TIMER feature is operating, it displays the
AUTO-ON/OFF time. To check the current
time, press the CLOCK button, and the time
will display.
Fan speed display
Displays the selected fan speed, AUTO
and three fan speed levels "
" " (MED) "
can be indicated. Displays AUTO when the
operating mode is either AUTO or DRY.
Note: Some models have no MED Fan
speed selection.
Lock Display
Displayed by pressing the LOCK button.
Press the LOCK button again to remove.
Sleep Display
Displayed by pressing the SLEEP button.
Press the SLEEP button again to remove.
Note:
All displays on the remote controller are
shown for illustration purposes only.
) , F AN
), DRY(
).
AUTO
。
~
24 hours)
" (LOW)
" (HIGH)