Maintenance - COOL WORKS MPPH-08CRN1-BI0 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Safety Precautions
-Always unplug the unit before cleaning or servicing.
-DO NOT use flammable liquids or chemicals to clean the unit.
-DO NOT wash the unit under running water. Doing so causes electrical danger.
-DO NOT operate the machine if the power supply was damaged during cleaning. A damaged power cord
must be replaced with a new cord from the manufacturer.
Clean the Air Filter
Air filter
(take out)
Remove the air filter
Clean the Unit
Clean the unit using a damp, lint-free cloth and mild detergent. Dry the unit with a dry lint-free cloth.
Store the unit when not in use
-Drain the unit's water collection tray according to the instructions in the following section.
-Run the appliance on FAN mode for 12 hours in a warm room to dry it and prevent mold.
-Turn off the appliance and unplug it.
-Clean the air filter according to the instructions in the previous section.
Reinstall the clean, dry filter before storing.
-Remove the batteries from the remote control.
Be sure to store the unit in a cool, dark place. Exposure to direct sunshine or extreme
heat can shorten the lifespan of the unit.

Maintenance

-Be sure to clean the air filter every 2 weeks for
optimal performance.
-The water collection tray should be drained
immediately after P1 error occurs, and before storage
to prevent mold.
-In households with animals, you will have to
periodically wipe down the grill to prevent blocked
airflow due to animal hair.
Maintenance Tips

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Mppha-08crn1-bh9Mpph-10crn1-bi0Mpphb-12crn1-bh9

Table des Matières