COOL WORKS MPPH-08CRN1-BI0 Manuel D'utilisation page 19

REMOTE CONTROL INSTRUCTIO
Features of remote control(continued)
temperature setting or to adjust the TIMER in a counter-clockwise
direction.
NOTE: Press and hold
will alternate the temperature display between the C & F scale.
4
SLEEP Button: In SLEEP mode,
Active/Disable sleep function. It can maintain the most
comfortable temperature and save energy. This function is
available on COOL or AUTO mode only. For the detail,
see Sleep operation in USER S MANUAL.
NOTE: While the unit is running under SLEEP mode, it would
be cancelled if MODE, FAN SPEED or ON/OFF button is
pressed.
5
RESET Button: When you press the recessed RESET button,
all current settings are cancelled and the control will return to
the initial settings.
FAN Button: Used to select the Fan Speed in four steps-
6
AUTO、LOW 、MED(some models without) or HIGH. Each
time the button is pressed, the fan speed mode is shifted.
7
TIMER Button: This button is used to preset the time ON
(start to operate) and the time OFF (turn off the operation).
8
CANCEL Button:
(a). If the TIMER ON, TIMER ON OFF or TIMER OFF ON
feature has been set, press the CANCEL button will override
the TIMER program and turn off the unit as well.
(b). If only set TIMER OFF feature, press the CANCEL button
will cancel the timer off setting and turn on the unit (when
the unit is off).
(c). If no TIMER feature has been set, press the CANCEL button,
and nothing will happen.
9
CLOCK Button: Use to set the time.
10
LED Button: Press this button to clear the digit display in the
air conditioner, press it again to activate it .
LOCK Button: When you press the LOCK button, all current
11
settings are locked in and the remote controller does not accept
any operation except that of the LOCK. Press again to cancel
the LOCK mode.
and buttons together for 3 seconds
,, , ,,