Setting Cooking Times & Power Levels - Samsung SMH5140WB Guide De L'utilisateur

Four à micro-ondes
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operation
Setting Cooking Times & Power Levels
Your microwave allows you to set up to three different stages of cooking,
each with its own time length and power level. The power level lets you
control the heating intensity from Warm (1) to High (0).
One-stage Cooking
For simple one-stage cooking, you only need to set a cooking time.
The power level is automatically set at High. If you want the power set at
any other level, you must set it using the Power Level button.
1
Use the Number buttons to set a cooking time. You can set a time
from one second to 99 minutes, 99 seconds. To set a time over one
minute, enter the seconds too.
For example, to set 20 minutes, enter 2, 0, 0, 0 .
2
If you want to set the power level to something other than High,
press the Power Level button, then use the number buttons to
enter a power level.
Power Levels:
1 = Warm
2 = Low
3 = Defrost
4 = Medium Low
5 = Medium
The display shows : PRESS START OR ENTER NEXT STAGE
COOKING TIME.
3
Press the Start button to begin cooking. If you want to change the
power level, press Pause/Cancel button before you press Start
button, and reenter all of the instructions.
6 = Simmer
7 = Medium High
8 = Reheat
9 = Sauté
0 = High
Some recipes require different stages of cooking at different tempera-
tures. You can set multiple stages of cooking with your microwave.
Multi-stage Cooking
1
Follow steps 1 and 2 in the "One-Stage Cooking" section on the
previous page.
The display shows : PRESS START OR ENTER NEXT STAGE
COOKING TIME.
When entering more than one cooking stage, the Power Level
button must be pressed before the second cooking stage can be
entered.
To set the power level at High for a stage of cooking, press the
Power Level button twice.
2
Use the Number buttons to set a second cooking time.
3
Press the Power Level button, then use the number buttons to set
the power level of the second stage of cooking.
The display shows the power level you have set and then PRESS
START OR ENTER NEXT STAGE COOKING TIME.
4
Press Start button to begin cooking, or repeat steps 2 and 3 to set
a cooking time and power level for a third stage of cooking.
When finished, press Start button.
17

Publicité

Chapitres

Table des Matières

Dépannage

loading

Table des Matières