AFG 5.9AE Manuel Du Propriétaire page 18

ASSEMBLY STEP 9
20
18
18
19
22
17
22
6
21
NOTE: All hardware for this step is pre-installed.
A Remove 4 PRE-INSTALLED BOLTS (17) from the CONSOLE (18).
B Attach the CONSOLE CABLES to the CONSOLE (18).
C Carefully tuck the CONSOLE CABLES into the CONSOLE MAST
20
(6) before attaching the CONSOLE (18). Attach CONSOLE (18)
19
to CONSOLE MAST (6) using 4 PRE-INSTALLED BOLTS (17).
NOTE: Do not to pinch any wires while attaching the console.
D Slide the HANDLEBAR BOOT (19) halfway up the UPPER
HANDLEBAR (20). Slide the UPPER HANDLEBAR (20) onto
the LOWER HANDLEBAR (21) making sure handlebars are joined
together completely. Secure the UPPER HANDLEBAR (20) to
the LOWER HANDLEBAR (21) using PRE-ATTACHED SET
SCREWS (22).
E Repeat STEP D on other side.
NOTE: Make sure upper handlebars are as far down as possible.
Handlebars can be damaged If not secured correctly.
ASSEMBLY COMPLETE!