Safety Instructions And Warnings; First Aid Rules - Piusi P3.5 Installation, Utilisation Et Entretien

Installation, use and maintenance
3.

SAFETY INSTRUCTIONS AND WARNINGS

Preliminary
checks before
installation
Maintenance
control
Prohibitions
4.

FIRST AID RULES

Contact with
the product
6 /124
Before proceeding, make sure you can install the product in a ventilated
area, free from hazards for operators and equipment.
WARNING
Poor ventilation, naked flames and sparks can give rise to hazardous
conditions, and cause fires, explosions and serious injuries.
The device is NOT anti-explosive type.
The device must be installed outside areas at risk of explosion.
Do not install in areas where inflammable vapors may be present.
Make sure that hoses are not routed close to high-traffic areas, sharp
edges, moving parts or hot surfaces. Use hoses within a temperature range
of -40°C to +82°C.
Before carrying out any inspection or maintenance operations, always shut
off the air and discharge the pressure from the circuit by following the
decompression and draining procedure.
WARNING
It is strictly forbidden to hold or transport the system by means of the hoses
connected to it.
The device is designed to pump fluid at high pressures. Directing the flow
towards any part of the body is strictly prohibited and may cause severe
injury.
In the event of problems deriving from INJECTION, INHALATION,
INGESTION or contact of the handled product with the EYES or SKIN,
consult the respective SAFETY DATA SHEET.
Hazardous fluids and toxic fumes can cause serious or fatal injuries.
M0352A EN