Machine And Manufacturer Identification; Technical Specifications - Piusi P3.5 Installation, Utilisation Et Entretien

Installation, use and maintenance

MACHINE AND MANUFACTURER IDENTIFICATION

9. 1.
The dispensing system comes with an
identification stamp attached to the pump
and contains the following information:
¦ type;
¦ product ID code;
¦ serial number.

TECHNICAL SPECIFICATIONS

10.
Compression ratio
Air pressure
Air intake thread
Oil intake thread
Oil outlet thread
Flow rate with
free outlet (8 bar)
Pick-up hose diameter -
Pick-up hose length
Total length
Retaining ring nut
Air pressure
10 /124
P 3.5 - ST P 3.5 - 940
F00214000 F00214020
3.5:1 3.5:1
3-8 bar 3-8 bar
43.5-116 psi 43.5-116 psi
1/4" G 1/4" G
1" G 1" G
1/2" G 1/2" G
21,5 l/min 21,5 l/min
5.7 5.7
USgal/min
42 mm
175 mm 940 mm
445 mm 1210 mm
2" G 2" G
3-7 bar 3-7 bar
43.5-101.5 psi 43.5-101.5 psi
WARNING
Before installing, always make sure the
type of dispensing system is correct.
P 5.5 - ST
F00214010
5.5:1
3-8 bar
43.5-116 psi
1/4" G
1" G
1/2" G
15,5 l/min
4.1
USgal/min USgal/min
-
175 mm
445 mm
2" G
3-7 bar
43.5-101.5 psi
P 5.5 - 940
F00214030
5.5:1
3-8 bar
43.5-116 psi
1/4" G
1" G
1/2" G
15,5 l/min
4.1
USgal/min
50 mm
940 mm
1210 mm
2" G
3-7 bar
43.5-101.5 psi
M0352A EN