Télécharger Imprimer la page

Honeywell HWM-340 Serie Instructions De Sécurité page 3

Humidificateur à vapeur tiede rempli par le haut

Publicité

Les langues disponibles

Les langues disponibles

SETTING UP YOUR HUMIDIFIER
Remove from box
Remove packaging material. Set aside instruction manual. Recycle
packaging materials or save for storage.
Ensure Proper Assembly
Make sure float and mist dome/mist chimney are securely in place.
Remove twist tie from power cord and extend power cord full length.
Do not operate humidifier with power cord coiled or tied or if its power
cord is damaged. See page 6 for detailed assembly information.
Placement
Select a firm, level location at least 12" (30cm) from any walls.
Place the humidifier on a water-resistant surface.
Kaz will not accept responsibility for property damage
caused by water spillage.
WARNING
KEEP OUT OF REACH OF CHILDREN. This product produces HOT STEAM and
should be placed in an area not accessible to children or pets with the power cord also
securely out of reach.
FILLING / RE-FILLING
DO NOT Pour Here
Pour
Here
Pour as much as 1.3 Gallons (4.9
L) or as little as 10 oz (0.3 L) of
water into the fill area located on
the top of the unit.
DO NOT ADD LIQUID INHALANT TO THE WATER.
DO NOT POUR WATER INTO THE BOILING CHAMBER.
ADDING LIQUID INHALANT
This humidifier can be used with liquid inhalants such as Kaz Inhalant or Vicks VapoSteam.
Inhalant should be used in the medicine cup only. DO NOT ADD LIQUID INHALANT TO THE WATER.
Step 1: Turn humidifier off, unplug and allow to cool for 20-30 minutes.
Step 2: Add 1 Tablespoon of liquid inhalant to the medicine cup.
Step 3: With dry hands plug unit in and proceed to following unit operating instructions.
Step 4: When no longer using inhalant remove liquid residue left from inhalant by using a soft
dry cloth to wipe out. Note: Liquid will remain in medicine cup even after inhalant
scent has been dispersed into the air.
Max Fill Line
You can continue to refill the
humidifier even if the unit has
not run out of water.
If the unit runs out of water, the
refill light will illuminate.
To reset the humidifier, turn the
unit off, fill water tank/fill area
with cool water, wait 15 minutes
and turn unit back on.
3

Publicité

loading