Fellowes PowerTrim A3 Mode D'emploi page 8

POWERTRIM LED and LIGHT SYMBOLS
Cut-Control LED touch pad LED array on cutting base
Off
Off
Blue
Blue flashing
Short blue flash every 2
seconds
Red and Blue flashing
Red
Touch
8
PowerTrim_v2.0_All_Langs.indd 8
Off
On
On
On
Off
On
Off
Purple + short beep
Indication Functions
Machine is switched off
Power on
a) SafeCut™ Clamp is open
b) SafeCut™ Guard is open
Ready (SafeCut™ Clamp
closed)
PowerTrim is Cutting
Sleep
Error
(e.g. SafeCut™ Clamp or Sa-
feCut™ Guard is open when
cutting is not yet complete)
Engine is too hot
Touch Cut-Control LED touch
pad during cutting
Action
Turn PowerTrim on at
power switch and mains
socket
a) Insert item and close
SafeCut™ Clamp
b) Make sure SafeCut™
Guard is closed
Press Cut-Control button
to re-activate PowerTrim
Check PowerTrim is
switched on properly and
item inside is secured
properly with SafeCut™
Clamp and SafeCut™
Guard closed properly
Turn PowerTrim off and
let engine cool down for
30 minutes
To end trimming – when
continuous trimming is
in process
12/02/2009 13:59:54