Changing Input Voltage From 230 Volts To 200 Volts; Electrical Service Guide - Hobart Welding Products BETA-MIG 2250 Mode D'emploi

2-9. Changing Input Voltage From 230 Volts To 200 Volts

2-10. Electrical Service Guide

Input Voltage
Input Amperes At Rated Output
Max Recommended Standard Fuse Or Circuit Breaker Rating In Amperes
Min Input Conductor Size In AWG/Kcmil
Max Recommended Input Conductor Length In Feet (Meters)
Min Grounding Conductor Size In AWG/Kcmil
Reference: 1996 National Electrical Code (NEC)
Cut cable ties as necessary.
1
2
2
3
Locate lead marked 230 VAC.
Slide tubing down and disconnect
black switch lead from splice. Be
sure 230 volt transformer lead and
white fan lead remain spliced.
3
Fold tubing over 230 volt transform-
er/fan lead splice and secure.
4
4
200 VAC
1 Locate lead marked 200 VAC.
Slide tubing down, and connect 200
volt lead stub to black switch lead
230 VAC
that was just disconnected from the
230 volt lead, and secure with exist-
ing hardware.
Slide tubing over connection and
secure.
Tools Needed:
5/16, 3/8 in
230 Volt Transformer
Lead/Fan Lead
Black Switch Lead
Tubing
200 Volt Lead
Ref. ST-802 287
200 230
40 35
60 50
8 10
108 (33) 94 (29)
10 10
S-0092J
OM-192 440 Page 13