tiko Energy Solutions Bridge-Box Athos Mode D'emploi page 7

Bridge-Box User's Manual
Step 1 Remove power from the electrical panel.
Step 2 Remove the cover panel. Unwire and remove the device. Keep in mind
that other devices of the tiko installation need the Bridge to run.
Step 3 Put the cover panel back. Ensure that no electrical contact can be
touched.
Step 4 Power on the system.
Step 5 If the device remains property of tiko Energy Solutions AG or
its authorized reseller, it must be returned. Otherwise, the
ultimate disposal of a device shall be handled according to
national laws and regulations.
tiko Energy Solutions AG
English
Uninstalling
7 / 48
IM-0007-0002 Rev. 7