Kalorik JK 45907 SS Mode D'emploi page 7

• The resulting extended cord should be arranged so that it will not
drape over the countertop or tabletop where it can be pulled on by
children or tripped over.
BEFORE THE FIRST USE
Remove all various packaging, stickers, or accessories from both the
inside and outside of the kettle.
Adjust the length of the cord by winding it under the base.
For perfect results, operate the digital cordless water kettle with fresh
water in order to clean any residue left from the manufacturing
process. When the appliance has cooled down, repeat the process 3
times with fresh water, before rinsing.
OPERATING INSTRUCTIONS
Always remove the kettle from the power base (1) before filling it or
•
before any operation.
Open the lid (5) by pressing on the lid opening button (6) and fill the
•
tank with fresh water, paying attention not to fill under the minimum
mark or above the maximum mark indicated on the glass housing
of the kettle (3).
Close the lid by pressing it down until it you hear a click. Make sure it
•
closes correctly.
Make sure the spout filter is well in position, as else the auto-shut off
•
feature might not work.
Put the kettle onto the power base (1), plug into the wall socket,
•
and switch on using the digital control panel (7) on the handle.
To boil water: simply press on the "Boil" button (B) once, the LED ring
•
(2) will come on, indicating that the appliance is operating.
To heat water at a selected temperature, press the temperature
•
setting button (C) repeatedly, until selecting the temperature you
want. The LED ring (2) will display a different color for each
temperature setting: green (120
° °
(175 F/80 C) and yellow (195
(a) will light on.
www.KALORIK.com
° °
F / 60 C), blue (160
°
F / 90 C). The corresponding LED light
°
7
° °
F / 70 C), purple
JK 45907 – 200831