Télécharger Imprimer la page

Lionelo Cora Manuel De L'utilisateur page 7

Chaise haute

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
adapted to child's height. There are two height levels available (fig. 8). To
change it, pull the belts with a fastener out, they are located at the back of
the backrest (see arrow in fig. 9). Next pull them through holes in the chair
and covering and insert in the corresponding place.
Note! The child must always be secured with chair safety belts!
Note! After you have fastened the chair safety belts, adjust them. The belts must
fit tight the child's body but must not restrict its movements.
4.
Seat height: there are four seat height levels available. To change it, press
height adjustment keys on both sides of the chair (4) and set the desired
height (fig. 10). After you have released the height adjustment, make sure
the seat is properly secured at the desired height.
Note! Do not adjust the product if the child is inside.
5.
Seat backrest: to change the backrest level, pull the lever at the back of the
backrest (1) and set as desired (fig. 11).
Note! The child should not sleep in the product, even if you set the lowest position
of the backrest. If your child needs to sleep, move it to a suitable place, e.g. crib.
Easy stand feature - folding the chair
To fold the product:
1.
Apply interlocks on front wheels (5).
2.
Change the seat height, set the lowest position (see: How to adjust the
product -> Seat height).
3.
Change the seat backrest inclination angle, set the vertical position (see:
How to adjust the product -> Seat backrest).
4.
Grab the tray adjustment lever (7). Pull the tray out as far as possible - until
red marking is visible on the frame (fig. 12).
5.
Press the tray folding key (2) (fig. 13) and lift it until you can hear a „click" (fig. 14).
6.
Press both folding keys (3) at a time and fold the chair (fig. 15).
7.
Pull the support (11) out (fig. 16) so that the chair can remain vertical.
How to clean and maintain
Do not expose the product to sunlight for a long time. The seat covering must
not be dried mechanically, ironed or washed in the washing machine. You must
‑ 7 ‑
EN

Publicité

loading