Installation - IDS BLANC ONE ARCUS MOBILE Mode D'emploi

GB
V. INSTALLATION
BLANCONE ARCUS is intended for use as an autonomous appliance. Use the device indoors
and only on a horizontal surface (floor).
1.
Unpack the transport boxes, remove the components and initially assemble the base
with the 5 wheels.
2.
Mount the vertical arm to the center of
the base.
3.
Mount the horizontal arm of the stand
and fix it with the side stop screw using
a 3 mm Allen key (included in the pack-
age).
4.
Place the counterweight at the rear of
the horizontal arm by rotating it clock-
wise. Note: It is important to mount the
counterweight securely on the arm (until
it stops rotating clockwise).
5.
Mount the bleaching head at the front of
the horizontal arm in the following order:
- Loosen the adjustment ball (rotate
counterclockwise)
- Tighten the bleaching head until it
stops.
- Tighten the adjustment ball (rotate
clockwise) so that the bleaching head
can move in all directions and stay in
each set position.
- Tighten hard the adjustment ball to fix
the bleaching head.
6 LED Bleaching Lamp - MOBILE
TOUCH
STICK
HOME
DAY
CARE
ULTRA
DUETTO
HOME
NIGHT
DUETTO
ACTIVE
CLICK
ARCUS
LIPS
ARCUS
DUETTO
CARE