Preparation For Work With Patients - IDS BLANC ONE ARCUS MOBILE Mode D'emploi

GB
VIII. PREPARATION FOR WORK WITH PATIENTS
1.
Before starting work with the bleaching device, insulate the pa-
tient's non-calcified soft tissue, place a cover or protective napkin
on the face, apply protective UV cream and put on protective
glasses. The bleaching gel is applied according to the directions
for use outlined by the gel manufacturer. The patient should be
under constant supervision by the dentist during the bleaching
process in order to avoid discomfort and to ensure all safety and
technological procedures are applied.
2.
It is desirable to check the sensitivity of the patient to the intensity of the light. The device
has two levels of intensity (High and Low) and the optimal conditions are selected by ad-
justing the distance of the device to the patient's teeth. Testing should begin at a high
level "Hi" (High) and a distance of 5 cm. If the thermal sensation is unpleasant and irritating,
increase the distance to achieve an acceptable thermal comfort. If the thermal sensation
is still unpleasant at 10-15 cm switch to low intensity- "Lo" (Low) and shorten the distance to
the teeth. If the patient has no sensitivity or sensitivity cannot be measured for some reason,
longer distance should be used.
10 LED Bleaching Lamp - MOBILE
TOUCH
STICK
HOME
DAY
CARE
ULTRA
DUETTO
HOME
NIGHT
DUETTO
ACTIVE
CLICK
ARCUS
LIPS
ARCUS
DUETTO
CARE