Qufora IrriSedo Klick Mode D'emploi page 8

EN
Emptying and disassembling the system
22. Place the system in the sink for emptying, separating and cleaning.
23. Separate the parts by clicking and pulling the connectors apart.
24. Empty the water from the system. To empty the control unit and the pump turn the
control unit to position 1 and let the water run out through the control unit (24a).
To empty the water bag open the valve on the water bag and let the water run through
the tube (24b).
22
Cleaning and storing after use
25. Clean the outside of the click tube, the water bag and tube with mild soap and water.
26. Hang the system to dry with the water bag lid and the valve on the water bag tube open
and leave the control unit in position 1.
27. Wash and dry your hands.
28. Store the product out of direct sunlight in a dry and ventilated place between 0° C and
30° C.
8
23
1
Open
valve
24a 24b