Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The control unit
Instructions for use
Preparing the system for use
1.
Wash and dry your hands.
2.
Before you start, make sure the valve on the water bag tube is closed - lever is parallel to
the tube.
3.
Open the lid on the water bag and fill the water bag with the amount of luke warm tap
water advised by your healthcare professional. Please note you need an extra 300 ml for
preparing your system. Close the lid on the water bag.
4. Connect the water bag tube to the pump.
5.
Connect the click tube to the control unit - when you hear a click it is connected.
1
5
Position:
1
2
3
4
•
Closed
valve
2
3
EN
4
5
Publicité
Table des Matières
