Bruno ELAN SRE-3050 Guide De L'utilisateur page 8

OPERATION: power swivel seat (optional)
POWER SWIVEL SEAT (optional)
©Bruno Independent Living Aids, Inc.
8
®
1. Position yourself in the seat.
2. Fasten the lap belt.
3. Position both feet securely on the footrest
and place your arms on the armrests.
4. Press and hold the paddle control (located
on the front edge of one of the armrests)
to travel UP / DOWN the rail.
5. Once you have reached the top or bottom
landing, release the paddle control.
6. To rotate the seat at the top landing,
press the paddle control again on the
same side.
7. Release the paddle control when you
have fully rotated out.
8. Unbuckle the lap belt and carefully exit
the seat.
NOTES:
• You may use the remotes to return the
rotated power seat back to the ride
position.
• If the unit stops unexpectedly while
traveling, check for obstructions or
excessive loading. You will only be able
to run the unit in the opposite direction
until the overload is cleared.
SRE-3050 OPERATOR 02jan2021