Operation; Standard Swivel Seat - Bruno ELAN SRE-3050 Guide De L'utilisateur

STANDARD SWIVEL SEAT

The SRE-3050 includes a "soft-start" feature
which prevents the unit from moving abruptly the
instant the UP/DOWN paddle control is pressed.
Press and hold the paddle control for a moment
to begin the gentle acceleration of the stairlift
to operating speed.
Depressing and holding the paddle
control will cause the carriage to move
until the carriage stops automatically
at the upper or lower end of the stair
rail, or until the switch is released.
Two (2) remotes enable you to move
the carriage to or from either end of
the stair rail.
Remotes are designed to
call / send an empty seat only!
The remotes are NOT designed to move
a seat with a person on board.
©Bruno Independent Living Aids, Inc.
7
®
OPERATION: standard swivel seat
1. Position yourself in the seat.
2. Fasten the lap belt.
3. Depress and hold the seat swivel lever.
4. Rotate the seat so that you are at right
angles to the rail (with your back to
the stairway wall).
5. Release the seat swivel lever to secure
the seat in that position.
A safety switch prevents operation of
the SRE-3050 unless the seat is locked
in position at right angles to the rail
(the "riding" position).
6. Lower both armrests completely.
7. Position both feet securely on the foot-
rest and place your arms on the arm-
rests.
8. Press and hold the paddle control
(located on the front edge of one of
the armrests) to travel UP / DOWN the
rail.
9. Once you have reached the top or bottom
landing, release the paddle control.
10. Depress and hold the seat swivel lever as
you rotate to the position for transferring
from the seat.
NOTE: The seat will only swivel at the
top landing.
11. Release the seat swivel lever and allow
the seat to lock in this position.
12. Unbuckle the lap belt and carefully exit
the seat.
SRE-3050 OPERATOR 02jan2021