Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Display Detail Description
1
Alarm-1 icon and set time.
Press Alarm-1 button once to turn on/off the alarm.
When turned on, use the (for hour) and (for minutes) to set
the alarm time while it is blinking. The time is set when
blinking stopped.
2
Detection of unregistered CA-AX audio transmitter icon
Press SPK+Alarm-2 buttons for 2 seconds to enable/disable.
When this function is disabled, the CA-360Q will only sound
alerts to its registered CA-AX audio transmitters. Default is
Off.
3
Alarm-2 icon and set time.
Press Alarm-2 button once to turn on/off the alarm
When turned on, use the (for hour) and (for minutes) to set
the alarm time while it is blinking. The time is set when
blinking stopped.
4
System mode icon - (M)aster or (S)ub (remote)
5
Power and battery status icon
Show low battery status on registered CA-AX (audio sensor)
6
Motion detect alerts enabled icon
Press "SPK"+"MODE" buttons for 2 seconds to enable/disable.
When function is disabled, the unit will not sound the alert on
registered CA-MX (motion sensor) is triggered. Default is Off.
7
Bed shaker connection icon
The number 1 or 2 shows which bed shaker is connected.
Bed shaker-1 will shake when alarm-1 is on.
Bed shaker-2 will shake when alarm-2 is on.
Both shakers will shake when an accessory alert is received.
8
Voice speech enable icon
Press MODE button for 3 seconds to change voice language.
9
Speaker volume level – Off – Low – High
Press SPK
button once to change the speaker volume
setting.
10
Main clock
Press CLOCK button for 2 seconds to show / hide the clock.
09.
www.sereneinnovations.com
Publicité
Chapitres
Table des Matières
