Sony SDP-E800 Mode D'emploi page 10

Getting Started
z
To adjust the volume of all the speakers at one time
Use MASTER VOLUME on the processor, remote, or
your multichannel processor.
When using an amplifier with 5.1 ch inputs, set this
unit's MASTER VOLUME to near the centre position
and adjust the amplifier's volume control.
Notes
• The test tone will not be emitted if the sound field is set to
VIRTUAL ENHANCED A/B, ACOUSTIC or KARAOKE.
• The front balance, rear balance, centre level, rear level, and
sub woofer level are shown in the display during
adjustment.
• Although these adjustments can also be made with the
LEVEL ADJUST menu using the digital processing control
buttons on the front panel, we recommend you follow the
procedure described above and adjust the speaker levels
from your listening position using the remote control.
10 GB