Goobay 39511 Mode D'emploi page 18

User Manual
Fig. 15: Mounting fixing strip
Fig. 16: Mounting of front protective grille
Fig. 17: Ready mounted table fan
17 Pushbuttons for setting the blower intensity
19 Pin for rotation adjustment
End of mounting.
18
9. Grasp the ends of the fixing strip (7)
together.
10. Insert the Phillips-head screw with
lens head (8 a) through the two
eyelets (15) and fix them with the screw
nut (8b).
The Phillips head screw should only be
screwed in minimally and be flush with
the nut.
11. Pull the resulted ring onto the edge of
the rear protective grille (14).
The edge of the protective grille must lie in
the rear groove (15) of the fixing tape.
Fig. 17 a).
12. Insert the front guard grille (6) into the
front groove (16) of the fixing strip.
Fig. 17 b).
13. Tighten the Phillips screw further
clockwise using a Phillipps
screwdriver. Fig. 17 c).
18 Plinth