Publicité
Les langues disponibles
Les langues disponibles
User positions
The user must stand in front of the polishing machine.
INFORMATION
The main switch of the polishing machine must be easily accessible.
Safety measures during operation
CAUTION!
Risk due to inhaling of health hazardous dusts and mist.
Dependent on the material which need to be processed and the used auxiliaries dusts
and mist may be caused which might impair you health.
Make sure that the generated health hazardous dusts and mist are safely sucked off at
the point of origin and is dissipated or filtered from the working area. Use an appropriate
suction unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Take additional preventive measures in order to safely avoid health hazards before
processing flammable materials (e.g. aluminum, magnesium) or before using flammable
additives (e.g. spirit).
Safety devices
Operate the polishing machine only with properly functioning safety devices.
Stop the polishing machine immediately if there is a failure in the safety device or if it is not func-
tioning for some reason.
It is your responsibility!
If the safety device has been activated or has failed, the polishing machine must only be oper-
ated again when
•
the cause of the failure has been removed,
•
you have made sure that there is no existing danger for employees or objects.
WARNING!
If you bypass, remove or override a safety device in any other way, you are endangering
yourself and other people working on the polishing machine. The possible causes are the
following
•
hand injuries,
•
fatal electrocution.
The polishing machine includes the following safety devices:
•
an ON/OFF switch with an EMERGENCY-STOP function.
•
apron for the shaft and the shaft extensions.
WARNING!
The separating protective equipment which is made available and delivered together with
the machine is designed to reduce the risk of workpieces or fractions of them which
being expelled, but not to remove them completely.
Publicité
