Aim Of This Document; Emphasised Text; Intended Use; Hazardous Operating Conditions - DST AQ-30B Manuel Utilisateur

1 SAFETY

1.1 AIM OF THIS DOCUMENT

This document accompanies delivery and is therefore an integral part of the
equipment. It describes the machine's design and configuration at the time of
delivery.
In the interest of safety, please study this document before installing or operating
the equipment.
Instructions relating to safety, handling, operation and maintenance must be
followed.
Non-compliance can result in serious personal injury or damage to the machinery
and may invalidate manufacturers' liabilities and warranties.
This document includes guidance for:
• Installers
• Operators
•
Please retain this document throughout the lifetime of the equipment.

1.2 EMPHASISED TEXT

Caution! Indicates hazards that could result in damage to the equipment.
Indicates "potentially" hazardous situations that could result
in damage to the equipment, serious personal injury or death.
Indicates "imminently" hazardous situations that could result
in damage to the equipment, serious personal injury or death.
Attention! Indicates important information or instructions that require
special attention.

1.3 INTENDED USE

for any other use. For further advice please contact a DST representative.
• conditioning of gases (other than air)
• conditioning of air contaminated with chemicals or aggressive elements
•
• in rooms or air systems having a potentially explosive atmosphere
(ATEX)
• conditioning of air at elevated pressures
•
G4 class
• compounds in the air that will possibly deteriorate the silica gel rotor -
see appendix for detailed information

1.3.1 HAZARDOUS OPERATING CONDITIONS

Operation of the system is deemed to be hazardous if it is:
• not operated inside or is not protected within a weatherproof enclosure.
• not operated within the permitted operating parameters (see technical
• operated outside the scope of 'normal' use (see intended use)

1.3.2 RESPONSIBILITIES OF THE OPERATOR

It is the responsibility of the operator of the system to ensure that all personnel
engaged in the installation, operation, maintenance and service of the equipment
have read and understood the relevant sections of this manual.
For your own safety, wear the appropriate personal protective equipment (PPE).
AQ-30, 31 EN.02

1.3.3 MINIMISING HAZARDS

To ensure that risk to personnel is minimised:
• Ensure that all activities relating to this equipment are carried out by
• Identify and prevent potential safety hazards in the environment.
To ensure a failure-free operation:
• Keep this manual ready to hand with the unit.
• Use the machine as intended only.
• Only use the machine if it is fully functional.
• Check the condition of the machine before using.
•
• Carry out maintenance and testing at prescribed intervals.
1.4 SAFETY
This equipment conforms to the relevant European regulations and directives and
is designed and manufactured to be safe and reliable in operation.
The continued safety and reliability of the supplied equipment is entirely dependent
on its correct handling, installation, operation and maintenance.

1.5 INSPECTION OF GOODS

Check for transportation damage! Use this product only if you assess it as being
undamaged and faultless. Any damage must be recorded by the forwarder at
the time of delivery and reported to the supplier of the equipment at the earliest
opportunity.
Please check the equipment carefully for damage upon receipt and after removal
of all packaging.

1.6 SAFETY ADVICE REGARDING TRANSPORTATION

position the unit.
If a forklift is used to move the unit, please ensure the load is
evenly balanced.

1.7 INSTALLATION

Attention! Installation, testing, commissioning and maintenance must
person. Wherever possible, all mechanical work must be carried out with
•
air conditioning plant and associated systems who
• has completed the appropriate health and safety training
• has read and is familiar with the contents of this manual
• is professionally competent to commission and service this type of
equipment.
Caution! The air dryer is designed for internal installation. For external use
it will require a weatherproof enclosure.
Caution! The air dryer must be installed on a horizontal plane.
Attention! The air ducts must be vibration-free and sizable enough to
prevent pressure build-up when conveying the incoming and outgoing air
from the unit.
Attention! The incoming and outgoing outlets on the machine are not
designed to bear any weight from the air ducts system.
7
EN
Seibu Giken DST