AKVATERM AKVA Standard Mode D'emploi page 18

AKVANTTI Accumulator Tank
1400 EK
NOTE: Pipe connections are on top of the
accumulator tank!
1. Entry from boiler
2. Return to boiler
3. Exit to heating circuit
4. Return from heating circuit
5. Domestic hot water coil 45 l/min
6. Pressure relief / Air bleeder
7. Drain coupling
8. Electrical resistor unit (3 pcs)
9. Thermometer/Thermostat unit (4 pcs)
2000 EK and 2400 EK
Pipe connections are usually on the side.
1. Tank unit
2. a) Domestic hot water coil 45 l/min
b) Additional coil unit
3. Thermometer/Thermostat Unit
4. Electrical resistor unit (4 pcs)
5. Heating circuit unit
6. Drain coupling
7. Pressure relief / Air bleeder
Maximum pressure
Maximum temperature
6
1.5 bar
110 °C