Specifications - AKVATERM AKVA Standard Mode D'emploi

7.

SPECIFICATIONS

AKVA Standard Accumulator Tank
1. Hatch
2. Heating circuit unit + Guide pipe
3. Drain coupling
4. Thermometer/Thermostat unit (4 pcs)
5. Tank unit + Guide pipe
6. Electrical resistor unit (2 - 6 pcs)
7. Domestic hot water coil, finned copper,
capacity 90 kW, standard 35 l/min,
+5...55/75 °C, structural pressure 10 bar
8. Pressure relief / Air bleeder
9. Polyurethane insulation
10. Coating, coated thin tin sheet
11. Tank
Maximum pressure
Maximum temperature
AKVASAN Repair Accumulator Tank
1. Pressure relief / Air bleeder
2. Thermometer/Thermostat unit (2 pcs)
3. Electrical resistor unit (EK model 2 pcs)
4. Hatch
5. Domestic hot water coil
6. Drain coupling
1.5 bar
110 ºC
5
Maximum pressure
Maximum temperature
1.5 bar
110 ºC