Publicité
Les langues disponibles
Les langues disponibles
Heater Specifications
CAUTION: CSA certified for use with only No. 1-K kerosene fuel.
Factory Tested: Kerosene, Diesel #1 and #2, Fuel Oil #1 and #2, JP8 (Jet A Fuel)
Model
Burn Rate
Fuel Rate
Electrical Input
Line Protection
Min. operating voltage
Pressure Setting
Max. Outlet Temp.
Fuel Tank Capacity
Ignition
Spark Generator
Primary Safety Control
Certification
WARNING: If the information in this manual is not followed
exactly, a fire or explosion may result causing injury or loss of life.
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance.
- Service must be performed by a qualified service agency.
Minimum Clearances:
Outlet: 8 feet (250 cm) / Sides, Top, Rear: 3 feet (91.4 cm)
DXH80KTHC
80,000 BTU/hr (23.4 kW)
.59 gal/hr (3.9 L/hr)
115 V, 60 HZ, 1 Ø, 4.0 A
10 A
110 V
4.2 psig (29 kPa)
1300 °F (704 °C)
6 gallons (22.7 L)
Direct Spark, Continuous
Igniter, 12 kV, 0.36 A
Solid State Control
DXH140KTHC
140,000 BTU/hr (41.2 kW)
1.0 gal/hr (3.9 L/hr)
115 V, 60 HZ, 1 Ø, 5.5 A
10 A
110 V
6.8 psig (47 kPa)
1300 °F (704 °C)
10 gallons (37.9 L)
Direct Spark, Continuous
Igniter, 12 kV, 0.36 A
Solid State Control
CONTENTS
WARNINGS
HEATER SPECIFICATIONS
OPERATING & SAFETY PRECAUTIONS
LIGHTING/OPERATING INSTRUCTIONS
MAINTENANCE
EXPLODED VIEW AND PARTS LIST
WIRING DIAGRAM
3
DXH210KTHCX
210,000 BTU/hr (61.5 kW)
1.6 gal/hr (6.0 L/hr)
115 V, 60 HZ, 1 Ø, 5.5 A
10 A
110 V
8.4 psig (58 kPa)
1300 °F (704 °C)
15 gallons (56.8 L)
Direct Spark, Continuous
Igniter, 12 kV, 0.36 A
Solid State Control
2
3
4
5
5
8
11
Publicité
