Optika Italy H Serie Manuel D'utilisation page 18

Used for setting digits behind the decimal point for measurement results.
Global:
Calibration Line Width
Color
EndPoint
Point, Angle, Line, Horizontal Line, Vertical Line, Rectangle, Circle, Ellipse, Annulus, Two Circles, Polygon, Curve:
Left-click the beside the measuring patterns mentioned above will unfold the corresponding attribute settings to set the
individual property of the measuring objects.
Name: Names such as 10X, 40X, 100X are based on magnification of the microscopes. For continuous zoom
microscopes, ensure that the selected magnification coincides with the scale alignment line on the mi-
croscope zoom knob.
Pixels per meter. Devices like microscopes have high resolution value.
Resolution:
Clear All: Click the Clear All button will clear the calibrated magnifications and resolutions.
Click Delete to delete the selected item for specific resolution.
Delete:
Figure 7 - Measurement Settings Page
Used for defining width of the lines for calibration.
Used for defining color of the lines for calibration.
Type: Used for defining shape of the endpoints of lines for calibration.
Means no endpoints
Null:
Rectangle: Means rectangle type of endpoints. It makes alignment more easily
Figure 8 - Magnification Calibration Management Settings Page
Page 18