Teka DVT TBS Serie Manuel D'instructions page 12

Instructions for use
By pressing the button shown in the figure 1, you
will be able to control the functions of the extractor.
To achieve better extraction, we recommend
switching on the extractor a few minutes before
starting to cook (3 - 5 minutes) so that the air flow is
continuous and stable when extracting the fumes.
Likewise, keep the extractor switched on for a few
minutes when cooking is complete to allow all
fumes and odours to be expelled.
88
1- Display
2- Timer
3- Light
4- Reduce fan speed
5- Increase fan speed
Program the working time
1) Switch on the cooker hood and choose the
required aspiration speed.
2) Push 'Timer'.
3) Select the required programming time from 1 to
99 minutes by using the buttons '+' and '-'.
4) The display will show the remaining programming
time.The maximum speed 'H' can only be selected
manually and will be changed automatically to the
second speed level after 7 minutes.
Filter saturation indicator "F"
•When the sign 'Saturation of the filters' is on, the
filters should be cleaned.
•After cleaning the filters, simultaneously push
"Timer" and "Light" keys for at least 3 seconds where-
upon the sign will be switched off.
Fresh Function
•The fresh function consists on activating the motor
at speed 1 for ten minutos each hour. This function
will stay active for 24h or until it is manually turned
off.
•To activate/ deactivate this function, simultaneously
push "-" and "+" keys.
Lights
For changing the light bulbs please contact the
manufacturer's nearest Technical Service.
Lamp code:
89220139