Bosch Professional GLM 30 Notice Originale page 8

OBJ_BUCH-2099-004.book Page 8 Thursday, April 21, 2016 1:10 PM
8 | English
Digital Laser Measure
Laser beam diameter (at 25 °C)
approx.
– at 10 m distance
– at 30 m distance
Automatic switch-off after approx.
– Laser
– Measuring tool (without meas-
urement)
Weight according to EPTA-
Procedure 01:2014
Dimensions
Degree of protection
Batteries
Rechargeable batteries
Individual measurement per bat-
tery set
Setting the unit of measure
Setting the sound
A) For measurements from the rear measuring tool edge, weak backlighting and 25 °C operating
temperature are applicable for high reflectivity of the target (e.g. a white-painted wall). In addition,
a deviation influence of ± 0.05 mm/m must be taken into account.
B) For measurements from the rear measuring tool edge, strong backlighting and – 10 °C to +45 °C
operating temperature are applicable for low reflectivity of the target (e.g. a black box). In addition,
a deviation influence of ±0.15 mm/m must be taken into account.
C) The width of the laser line depends on the surface characteristics and on the ambient conditions.
D) except battery compartment
The measuring tool can be clearly identified with the serial number 5 on the type plate.
Product Features
The numbering of the product features shown refers to the illustration of the measur-
ing tool on the graphic page.
1 Display
2 Measuring button
3 Battery lid
1 609 92A 297 | (21.4.16)
C)
9 mm
C)
27 mm
20 s
5 min
0.09 kg
105 x 41 x 24 mm 105 x 41 x 24 mm
IP 54 (dust and splash IP 54 (dust and splash
D)
proof)
2 x 1.5 V LR03 (AAA) 2 x 1.5 V LR03 (AAA)
2 x 1.2 V HR03 (AAA) 2 x 1.2 V HR03 (AAA)
5000
–

GLM 30
C)
9 mm
C)
27 mm
20 s
5 min
0.09 kg
D)
proof)
5000

–
Bosch Power Tools