Connecting The Tablet; Software / Driver; Service; Replacing The Pen Tip - Wacom STU-300 Manuel De L'utilisateur

Connecting the tablet

The STU-300 can be connected to a host computer via a USB cable. Consult your
Wacom Signature Solution Partner for the STU-300 and host computer connection.

Software / Driver

Wacom does not provide any driver or application software for the STU-300.
Any application needed to connect and run the STU-300 as a signature capturing
device must be delivered by a third party.

Service

The STU-300 is part of a complete solution that has been delivered by a third party.
Please contact your Wacom Signature Solution Partner for any support.

Replacing the pen tip

The pen tip (nib) can wear with normal use. In the unlikely case that the nib gets too
short or develops a sharp edge, you can replace it with spare nibs.
For replacement of the pen tips please contact your Wacom Signature Solution
Partner. The spare part number for the pen nibs is PSI-A007.
SignPad.indb 5 SignPad.indb 5
5
2009/11/12 10:32:43 2009/11/12 10:32:43