Publicité
Les langues disponibles
Les langues disponibles
Fitting Instructions
Converter
EN
Applications:
Voltage converter plug-in adapter to supply
a 12V- trailer from a 24V trailer socket.
The converter is only suitable for electric
light bulbs!
Configuration:
Input: 7-contact connector 24V
Output: 7-contact socket 12V
6 x 70W, maximum 220W
Hint:
Usually, the adapter works well with all light
circuit controls. In old electro-mechanic direc-
tion indicator units, which were used until
1995, the trailer control lamp may not work,
even though the direction indicators are
working correctly.
This error is not a malfunction of the convert-
er, but an inevitable incompatibility of the ap-
plied principle of the converter with magnetic
current-sensors. In that case, the converter
may not be used. Use the converter for fixed
mounting, Article no. 76121250, which is also
available in our product range.
www.herthundbuss.com
IMPORTANT
Ensure that the connector will not
be pushed aside or the cable will
not be pulled if the trailer or its
attachments swivel out.
The converter is only suitable for
electric light bulbs. LED rear lamps
may work in nearly all cases.
The left side rear lamp and the
right side rear lamp may not be
connected on the trailer.
The connection of other electrical
devices is not allowed and can
cause damage.
76121156
4
Publicité
