LAMPUGA FILON FUTURE DE-1.0.2 Notice D'utilisation page 12

CHARGING SYSTEMS - RESONANCE FREQUENCY TECHNOLOGY
for Lithium-Ion batteries
Conservation of charge (battery dependent)
4.5
If the battery is not disconnected from the charger after charging is complete, the charger switches to charge retention.
This counteracts self-discharge so that the battery's state of charge can be maintained.
5 Display and operating unit
On the front of the charger is the operating and display unit with four light elements (one of which is a red/white dual LED)
and a pause button. The charger has optional an USB connection for software updates and reading out the charging
history. Work on the charger may only be carried out by trained personnel.
6 LED display
The charge state of the battery is indicated by the LEDs and in case of an error, an error code is also output via these
LEDs. The meaning of the LED display is described in more detail below.
Operating state during charging
Li-Ion
preparation for loading
SoC < 80%
SoC > 80%
SoC = 100%
batterie balancing
pause
Operating status in case of an error
Li-Ion
CAN / battery missing
battery error
time / capacity error
communication error
system error
temperature error
Operating instructions
O (white)
X
O
O = flashing X = permanent
X (white)
X (red)
X (red) X
X (red)
X (red) X
X (red)
X
X
X X
O
CAN communication optional
check cables/connections
battery voltage too high or too low
X
X
device overheated (remove
X
contamination if necessary)
Rev. no.: EN-1.0.2
note
battery dependent
alternating flashing
note
Time or
Capacity overrun
external device error
internal device error
FILON FUTURE M ION