Unpacking The Machine; Safety - COMAC CM Mini Orbital Manuel D'utilisation Et D'entretien

ATTENTION:
Upon receiving the machine, carefully check that its packaging and the machine inside the packaging
have not been damaged during shipment and transport.
In case of evident damage, keep the original packaging so that it can be checked by the courier or
freight company who delivered it. Immediately contact the courier or freight company to register a
request for compensation of damages.
Check to make sure that the following parts which accompany the machine are contained in the
packaging:
• -Use and maintenance manual
• - Battery mounted in the battery support compartment situated on the telescopic handle
• - Box containing the specific battery charger with its use and maintenance manual and power
cord suitable for the country in which the machine will be used.
Attention! Make sure the on/off switch of the machine is in the off position "0", firmly held in this
position with the adhesive tape which should be removed before use.
The descriptions contained in this document are not binding. The company therefore reserves the
right to make any modifications at any time to elements, details, or accessory supply, as considered
necessary for reasons of improvement or manufacturing/commercial requirements. The reproduction,
even partial, of the text and drawings contained in this document is prohibited by law.
The company reserves the right to make any technical and/or supply modifications. The images
are shown as reference only and are not binding as to the actual design and/or equipment.
The machine is contained in its packaging. The packaging components (plastic bags,
staples, etc.) are potentially dangerous and should not be kept within the reach of children
or disabled persons, etc.
The total weight of the two packages is 12 kg (machine components plus packaging).
The dimensions of the two packages are:
A 200mm
B
320mm
C
1020mm
To indicate potential danger, the following symbols are used.
Always read this information carefully and take the necessary precautions to protect the persons and objects!
To avoid accidents, the collaboration of the user is essential – no accident prevention program can be effective without the
total collaboration of the personnel directly responsible for the use of the machine. The majority of accidents are caused by
the non-observance of the most elementary rules of caution.

UNPACKING THE MACHINE

MOVING THE PACKAGED MACHINE

SAFETY

18