Initialization - Panasonic WH-UD03JE5 Serie Mode D'emploi

Ballon + module hydraulique air/eau
Masquer les pouces Voir aussi pour WH-UD03JE5 Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 268
3
Temperature of each zone
4
Time and day
5
Water Tank temperature
6
Outdoor temperature
7
Sensor type/Set temperature type icons
Water Temperature
→Compensation curve
Room Thermostat
→External

Initialization

Before starting to install the various menu settings, please initiate the Remote Controller by selecting the language of
operation and installing the date and time correctly.
When power is turned on for the fi rst time, it becomes the setting screen automatically. It can also be set from personal
setting of the menu.
Selecting the language
Wait while the display is initializing.
When initializing screen ends, it turns to
normal screen.
When any button is pressed, language
setting screen appears.
1 Scroll with
and
2 Press
to confi rm the selection.
Setting the clock
1 Select with
or
either 24h or am/pm format (for example, 15:00
or 3:00 pm).
2 Press
to confi rm the selection.
3 Use
and
to select year, month, day, hour
and minutes. (Select and move with
press
to confi rm.)
4 Once the time is set, time and day will appear
on the display even if the Remote Controller is
turned OFF.
Water Temperature
→Direct
Room Thermostat
→Internal
to select the language.
how to display the time,
and
Pool only
Room Thermistor
LCD blinking
EN
19

Publicité

Table des Matières
loading

Table des Matières