Installing The Tv On/Off Sensor - Bose LIFESTYLE DVD Notice D'installation

Masquer les pouces Voir aussi pour LIFESTYLE DVD:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
Deutsch
Español
Dansk

Installing the TV on/off sensor

Figure 22
TV on/off sensor installed
on your TV
Français
Deutsch
Italiano
Nederlands
Español
The TV on/off sensor works with the system to automatically turn on the TV, as needed, when
another video source (DVD, cable/satellite box, etc.) is selected. If you choose not to use the
sensor, you need to turn on your TV separately.
Note: For information on how to set the LIFESTYLE
sensor, refer to your Operating Guide.
For a larger TV, you may want a second person to help as you follow the steps below:
1. Plug the sensor cord connector into the TV SENSOR jack on the media center. !
If you are using a SCART adapter, plug the sensor directly into the pass-through !
jack provided on the adapter (Figure 15 on page 18).
2. Temporarily position the TV on/off sensor on the back of your TV.
Note: DO NOT attach the supplied mounting strip until you have tested and activated the
automatic feature as explained below.
TV on/off sensor
Sensor
mounting
strips
TV SENSOR
jack
Note: Mount the sensor on the bottom rear of a projection TV chassis. Front projectors with a
separate screen may not work with the sensor.
3. Turn on your TV to test the sensor and activate the feature.
A. On the LIFESTYLE
Use the arrows to move around the on-screen menu and
press Enter to make selections:
B. On the TV screen, move right to Video and press Enter.
C. On the rear of the TV, move the sensor as needed, and notice when the on-screen !
!changes from
TV Power Status
D. Attach the included mounting strips, one to the sensor and one to the TV, and press
them together to hold the sensor in this effective position.
E. On the TV screen, move down to
– Automatic (for TV models that do not use a European-style SCART !
connector).
– Euro Connector (for TV models that use a SCART connector).
F.
Press Enter to confirm this setting.
G. Press Exit to leave the System menu. This completes activation.
Français
Svenska
Italiano
®
remote to control your TV and work with the
Rear of TV
Media center
connection panel
system remote control, press System. !
®
TV not detected
, and select:
TV Power
Nederlands
Svenska
B
S
C
ASIC
YSTEM
ONNECTIONS
to
.
TV ON
25

Publicité

Chapitres

Table des Matières
loading

Table des Matières