Dell Latitude 3510 Manuel De Service page 72

Table des Matières

Publicité

6. Remove the
WWAN
card.
7. Remove the
coin-cell
battery.
8. Remove the
memory
modules.
9. Remove the DC-in.
10. Remove the
solid state
11. Remove the
hard
drive.
12. Remove the touchpad.
13. Remove the speakers.
14. Remove the heatsink.
15. Remove the
system
board.
NOTE:
The system board can be removed along with the heat sink.
About this task
The figure indicates the location of the Palmrest Assembly and provides a visual representation of the removal procedure.
Steps
Once the required parts are removed, the bare palmrest assembly can be accessed and removed.
Next steps
1. Install the
system board
2. Install the heatsink.
3. Install the speakers.
4. Install the touchpad.
5. Install the
hard
drive.
6. Install the
solid state
drive.
7. Install the DC-in.
8. Install the
memory
modules.
9. Install the
coin-cell
battery.
10. Install the
WWAN
card.
11. Install the
WLAN
card.
12. Install the battery.
13. Install the
base
cover.
72
Démontage et remontage
drive.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

P101f

Table des Matières