8. Installez la
carte
SD.
9. Suivez la procédure décrite dans la section
Carte d'E/S
Removing the IO Board
Prerequisites
1. Follow the procedure in
2. Remove the
SD
Card.
3. Remove the
base
cover.
4. Disconnect the battery.
5. Remove the
WLAN
card.
6. Remove the
WWAN
card.
7. Remove the
solid state
NOTE:
Hall Sensor is a part of the IO board and the entire IO board needs to be replaced if the Hall Sensor is faulty.
About this task
The following images indicate the location of the memory module and provide a visual representation of the removal procedure.
62
Démontage et remontage
Après une intervention à l'intérieur de
before working inside your
drive.
computer.
l'ordinateur.