English; Symbols - Milwaukee 2309-60 Notice Originale

TECHNICAL DATA INSPECTION CAMERA
Battery voltage.........................................................................
Weight with battery ..................................................................
Camera cable length ...............................................................
Camera head ...........................................................................
Screen resolution.....................................................................
Picture resolution .....................................................................
Max. battery life .......................................................................
Protection class .......................................................................
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS INSPECTION CAMERA
Switch off the mains fuse for the relevant area when working
behind walls.
When working in pipes, make sure that these are not live or
electrically charged. The pipes must not contain any liquid.
The camera and the device must not come into contact with
liquid.
The camera and the cable must not come into contact with
oil, gas or other materials capable of causing corrosion.
To reduce the risk of explosion, electric shock and property
damage, always check the work area before beginning a
job. Do not allow cable to contact electrical, chemical, or
moving hazards.
Auto use: Turn off the engine and allow to cool before
beginning inspection. Do not allow the visual inspection
camera or cable to contact oil, gas, or other corrosive
materials.
To reduce the risk of damage to the tool, do not use
excessive force or "kink" the cable. Do not use in areas
where visual inspection camera and cable will contact
corrosive or oily substances.
Do not use the cable to clear clogs or move obstructions.
This is not a drain cleaner!
The product camera sleeve/lens/LCD may effected by
Electro Static Discharge and make LCD display abnormally
as blank screen/screen mess/display dimness, you could
recover it by pressing power key.
Warning: This is a class A product. In a domestic
environment this product may cause radio interference in
which case the user may be required to take adequate
measures.
SAFETY INSTRUCTIONS BATTERY
This tool is designed to be powered by 9 V battery properly
inserted into the instrument. Do not attempt to use with any
other voltage or power supply.
Do not leave batteries within the reach of children.
Do not mix new and used batteries. Do not mix brands (or
types within brands) of batteries.
Do not mix rechargeable and non-recharge-able batteries.
Install batteries according to polarity (+ / –) diagrams.
Properly dispose of used batteries immediately.
Battery acid may leak from damaged batteries under extreme
load or extreme temperatures. In case of contact with battery
acid wash it off immediately with soap and water. In case of eye
contact rinse thoroughly for at least 10 minutes and
immediately seek medical attention.
10

ENGLISH

2309-60
.............................9 V
......................482,4 g
......................914,4 mm
........................65,8 mm
................. 320x240 Pixel
......................... 30x M Pixel
.............................1 h
....................... IP54
This appliance is not intended to
be used or cleaned by persons
with reduced physical, sensory or
mental capabilities, or lack of
experience or knowledge, unless
they have been given instructions
concerning the safe use of the
appliance by a person legally
responsible for their safety. They
should be supervised whilst using
the appliance. Children shall not
use, clean or play with this
appliance, which when not in use
should be secured out of their
reach.
SPECIFIED CONDITIONS OF USE
The digital inspection camera can be used to view and
inspect areas that are hard to access. It is ideal for the rapid
and simple localisation of problems and objects without
having to open or damage items.
Do not use this product in any other way as stated for
normal use.
BATTERIES
Battery packs which have not been used for some time
should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the
performance of the battery pack. Avoid extended exposure
to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept
clean.
MAINTENANCE
Always keep the camera lens clean.
Use only Milwaukee accessories and Milwaukee spare
parts. Should components need to be replaced which have
not been described, please contact one of our Milwaukee
service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the Article No. as well as the machine type
printed on the label and order the drawing at your local
service agents or directly at: Techtronic Industries GmbH,
Max-Eyth-Straße 10, 71364 Winnenden, Germany.

SYMBOLS

CAUTION! WARNING! DANGER!
Please read the instructions carefully before
starting the machine.
CAUTION: Possibly hazardous optical
radiation emitted from this product. Do not
stare at operating lamp. May be harmful to
the eye.
Do not dispose of electric tools together with
household waste material.
Electric tools and electronic equipment that
have reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling facility.
Check with your local authority or retailer for
recycling advice and collection point.
European Conformity Mark
National mark of conformity Ukraine
EurAsian Conformity Mark.
ENGLISH 11