Publicité
Les langues disponibles
Les langues disponibles
9. Quick selection of color palette
From the main window (Figure 4) of the measurement result (Figure 5) you can quickly change the
current color palette. To see the list of available palettes, press one of the buttons
Using
select the
.
10. Making measurements
1. Turn the instrument on by means of
2. Select the desired color palette by means of the fast selection menu.
3. Place the instrument on the surface under examination. Caution! The part with the
sensor must touch the surface with all edges.
4. To make a measurement, press the button "OK"
measurement, take care that the instrument remains motionless.
5. After the measurement has been finished, the result will be shown in the display.
6. You can make another measurement by pressing "OK"
11. Turning the instrument off
• To turn the instrument off at any time, press and hold down for 3 seconds
release the button.
• The colorimeter turns off automatically after 3 minutes of not being used.
• If the battery charge is too low, an icon will pop up showing a discharged battery and the
instrument will turn off. The battery must be replaced.
12. Maintenance and service
The Paint Checker is designed and constructed to provide many years of reliable operation. However,
if a fault occurs that impairs the instrument's correct functioning, then remove the batteries to prevent
the risk of further damage.
For more information about preventing faults or damage to your Paint Checker, please read the
Instrument Care section below.
WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1 | Tel. +49 (0)7062-91556-0 |
Fax +49 (0)7062-91556-10 | E-Mail info@wolff-tools.com | Internet www.wolff-tools.de
desired element in the color palette and confirm with "OK"
.
. Caution! While making a
.
.
.
, and then
Publicité
