Publicité
Les langues disponibles
Les langues disponibles
Trouble shooting
Description
LCD display "Lo" or "Hi"
No response when pressing
measurement button.
No display or improper display
No beeper
IACER Srl
Solutions
1. Breeze, water, sweating,
cosmetic on forehead may
affect measurement.
2.Check deviation value setting.
Defaulted value is 0.8°C.
3.
While
environmental temp changes
so enormously or if
thermometer is used directly
from high-temp object to very
low-temp
measurement difference will
happen.
The
should be kept in a relative
stable environment for 10
minutes to get heat balance
before
starting
measurement.
4.Ensure
distance is 5cm to 8cm.
1.Take out and reassemble
battery.
2.Check if the thermometer is
under
menu
procedure of menu setting,
thermometer is unable to
measure and therefore no
response.
Take out battery and install
battery again.
Check if the beeper is switched
off.
29
ENG
if
the
testing
the
one,
the
thermometer
a
new
measurement
setup.
In
MNPG314-00
Publicité
