Measurement
B
ODY TEMPERATURE
Press
•
thermometer and it displays boot screen (fig. 9.1).
After POST and two beeps, it will display value of
room temperature and be ready for measurement
(fig. 9.2).
Make sure the thermometer is under body mode.
•
Keep distance at less than 5cm from upper
•
eyebrows
measurement button and when it gives a "beep"
measurement value is exceeding alarm value
(Defaulted value is 38°C), it will give 3 beeps as an
indication.
After measurement, if the thermometer is idle in
•
20 seconds, it will display "OFF" (fig. 9.5) and gives
a beep and shut off automatically.
IACER Srl
measurement
to
the
button
probe
(fig.
24
ENG
to
turn
9.3).
Press
MNPG314-00
on